Timber flush door 2

timber-flush-door-2 dresses opening:door — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

Used in examplesCorner Café — Retail Parade Northline Distribution Warehouse Aster Court Hotel + Spa Courtyard Estate — 8 Bedroom Residence

9of 500 meshes
3slots
1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Timber flush door 2, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$surface

$frame

$hardware

This definition leaves $surface and $frame and $hardware open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Generated views

The body and its drawing evidence

The deterministic renders check the body's installed face, structure and depth. Geometry, material and the selected finish stay unchanged.

Front renderFRONT · ORTHOGRAPHIC

Rendered axonometricAZ 40° · EL 32°

Paste this

Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pack-opening-oak","of":"timber","value":58,"hatch":"timber","body":{"roughness":0.68}}
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"lookdef","id":"timber-flush-door-2","for":"opening:door","desc":"Plain flush timber door, unpanelled, with simple frame and handle.","slots":{"surface":"pack-opening-oak","frame":"pack-opening-oak","hardware":"pal-steel"},"note":"Standalone flush timber doorset: timber jamb frame, leaf, threshold, hinges and lever only. The host wall is deliberately absent.","body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1,"height":0.055,"depth":0.12,"radius":0.014,"segments":3},"position":[0,1.9725,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.065,"height":1.95,"depth":0.12,"radius":0.014,"segments":3},"position":[-0.47,0.98,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.065,"height":1.95,"depth":0.12,"radius":0.014,"segments":3},"position":[0.47,0.98,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":0.84,"height":1.91,"depth":0.055,"radius":0.012,"segments":3},"position":[0,0.99,0.025]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.22,"height":0.025,"depth":0.025,"radius":0.008,"segments":3},"position":[0.24,0.92,0.066]},{"type":"Mesh","material":"$hardware","geometry":{"type":"CylinderGeometry","radiusTop":0.035,"radiusBottom":0.035,"height":0.025,"radialSegments":16},"position":[0.34,0.92,0.067],"rotation":[1.5707963267948966,0,0]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.025,"height":0.12,"depth":0.018,"radius":0.006,"segments":3},"position":[-0.43,0.42,0.069]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.025,"height":0.12,"depth":0.018,"radius":0.006,"segments":3},"position":[-0.43,1.42,0.069]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.92,"height":0.035,"depth":0.12,"radius":0.012,"segments":3},"position":[0,0.025,0]}]},"preview":{"projection":"perspective","azimuth":78,"elevation":12,"fov":34,"margin":1.04}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/openings.ndjson model.ndjson > dressed.ndjson

Download openings pack 23 KB · NDJSON ↓