Sliding glass door

sliding-glass-door dresses opening:sliding — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

Used in examplesCorner Café — Retail Parade Chandler Pool — Desert Courtyard Aster Court Hotel + Spa Courtyard Estate — 8 Bedroom Residence

19of 500 meshes
3slots
1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Sliding glass door, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$frame

$glazing

$hardware

This definition leaves $frame and $glazing and $hardware open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Generated views

The body and its drawing evidence

The deterministic renders check the body's installed face, structure and depth. Geometry, material and the selected finish stay unchanged.

Front renderFRONT · ORTHOGRAPHIC

Rendered axonometricAZ 40° · EL 32°

Paste this

Every part: the 3 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pack-opening-glass","of":"glass","value":72,"body":{"type":"MeshPhysicalMaterial","transmission":0.92,"ior":1.5,"thickness":0.12}}
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"materialdef","id":"pal-steel-dark","of":"steel","value":20}
{"t":"lookdef","id":"sliding-glass-door","for":"opening:sliding","desc":"Wide sliding glazed door with overlapping panels and track.","slots":{"frame":"pal-steel-dark","glazing":"pack-opening-glass","hardware":"pal-steel"},"note":"Standalone two-panel sliding glass doorset with one outer frame, two tracks, overlapping framed leaves and a recessed pull. There is no duplicate frame or host wall.","body":{"type":"Group","scale":[1.75,1,0.18],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.055,"height":1,"depth":1},"position":[-0.4725,0.5,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.055,"height":1,"depth":1},"position":[0.4725,0.5,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.89,"height":0.055,"depth":1},"position":[0,0.9725,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.89,"height":0.045,"depth":1},"position":[0,0.0225,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.86,"height":0.016,"depth":0.09},"position":[0,0.052,-0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.86,"height":0.016,"depth":0.09},"position":[0,0.052,0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.86,"height":0.016,"depth":0.09},"position":[0,0.948,-0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.86,"height":0.016,"depth":0.09},"position":[0,0.948,0.12]},{"type":"Mesh","material":"$glazing","geometry":{"type":"BoxGeometry","width":0.4,"height":0.82,"depth":0.035},"position":[-0.21,0.5,-0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.86,"depth":0.11},"position":[-0.4275,0.5,-0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.86,"depth":0.11},"position":[0.0075,0.5,-0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.435,"height":0.035,"depth":0.11},"position":[-0.21,0.9125,-0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.435,"height":0.035,"depth":0.11},"position":[-0.21,0.0875,-0.12]},{"type":"Mesh","material":"$glazing","geometry":{"type":"BoxGeometry","width":0.4,"height":0.82,"depth":0.035},"position":[0.21,0.5,0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.86,"depth":0.11},"position":[-0.0075,0.5,0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.86,"depth":0.11},"position":[0.4275,0.5,0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.435,"height":0.035,"depth":0.11},"position":[0.21,0.9125,0.12]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.435,"height":0.035,"depth":0.11},"position":[0.21,0.0875,0.12]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.022,"height":0.17,"depth":0.035,"radius":0.008},"position":[0.035,0.5,0.2]}]}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/openings.ndjson model.ndjson > dressed.ndjson

Download openings pack 23 KB · NDJSON ↓