Open-gate refuse enclosure

open-gate-refuse-enclosure-2 dresses asset:refuse-enclosure — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

22of 500 meshes
6slots
2finishes

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Open-gate refuse enclosure, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$frame:block

$frame:frame

$surface:slat

$frame:bin

$surface:lid

$hardware

This definition leaves $frame:block and $frame:frame and $surface:slat and $frame:bin and $surface:lid and $hardware open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Generated views

The body and its drawing evidence

The deterministic renders check the body's footprint, structure and depth. Geometry, material and the selected finish stay unchanged.

Top renderEL 90° · ORTHOGRAPHIC

Rendered axonometricAZ 40° · EL 32°

Paste this

Every part: the 6 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pack-bin-body","of":"paint","value":42,"accent":"#33463a"}
{"t":"materialdef","id":"pack-bin-lid","of":"paint","value":20,"accent":"#26332b"}
{"t":"materialdef","id":"pack-car-graphite","of":"car-paint","value":20,"accent":"#33383d","body":{"type":"MeshPhysicalMaterial"}}
{"t":"materialdef","id":"pack-enclosure-block","of":"masonry","value":72,"accent":"#a9a49a"}
{"t":"materialdef","id":"pack-enclosure-timber","of":"timber","value":58,"accent":"#7c6248","body":{"roughness":0.82}}
{"t":"materialdef","id":"pal-steel-dark","of":"steel","value":20}
{"t":"lookdef","id":"open-gate-refuse-enclosure-2","name":"Open-gate refuse enclosure","for":"asset:refuse-enclosure","desc":"Refuse enclosure with open metal gates and screened sides.","slots":{"frame:block":"pack-enclosure-block","frame:frame":"pack-car-graphite","surface:slat":"pack-enclosure-timber","frame:bin":"pack-bin-body","surface:lid":"pack-bin-lid","hardware":"pal-steel-dark"},"note":"A roofless 3.60 x 2.40 x 2.00 m service enclosure: concrete pad, U-shaped pale masonry walls, two slatted gates held open and exactly two commercial bins inside. Repeated slats make the gates read as screens rather than opaque panels.","body":{"type":"Group","children":[{"type":"Mesh","material":"$frame:block","geometry":{"type":"RoundedBoxGeometry","width":1.5,"height":0.86,"depth":0.1,"radius":0.018,"segments":3},"position":[0,0.43,-0.55]},{"type":"Mesh","material":"$frame:block","geometry":{"type":"RoundedBoxGeometry","width":0.1,"height":0.86,"depth":1.1,"radius":0.018,"segments":3},"position":[-0.7,0.43,0]},{"type":"Mesh","material":"$frame:block","geometry":{"type":"RoundedBoxGeometry","width":0.1,"height":0.86,"depth":1.1,"radius":0.018,"segments":3},"position":[0.7,0.43,0]},{"type":"Mesh","material":"$frame:block","geometry":{"type":"RoundedBoxGeometry","width":1.5,"height":0.07,"depth":1.12,"radius":0.015,"segments":3},"position":[0,0.035,0]},{"type":"Mesh","material":"$frame:bin","geometry":{"type":"RoundedBoxGeometry","width":0.4,"height":0.6,"depth":0.42,"radius":0.045,"segments":3},"position":[-0.3,0.33,-0.1]},{"type":"Mesh","material":"$surface:lid","geometry":{"type":"RoundedBoxGeometry","width":0.44,"height":0.075,"depth":0.46,"radius":0.025,"segments":3},"position":[-0.3,0.67,-0.1],"rotation":[-0.08,0,0]},{"type":"Mesh","material":"$hardware","geometry":{"type":"TorusGeometry","radius":0.045,"tube":0.016,"radialSegments":8,"tubularSegments":14,"arc":6.283185307179586},"position":[-0.43,0.05,0.08],"rotation":[0,1.5707963267948966,0]},{"type":"Mesh","material":"$hardware","geometry":{"type":"TorusGeometry","radius":0.045,"tube":0.016,"radialSegments":8,"tubularSegments":14,"arc":6.283185307179586},"position":[-0.16999999999999998,0.05,0.08],"rotation":[0,1.5707963267948966,0]},{"type":"Mesh","material":"$frame:bin","geometry":{"type":"RoundedBoxGeometry","width":0.4,"height":0.6,"depth":0.42,"radius":0.045,"segments":3},"position":[0.3,0.33,-0.1]},{"type":"Mesh","material":"$surface:lid","geometry":{"type":"RoundedBoxGeometry","width":0.44,"height":0.075,"depth":0.46,"radius":0.025,"segments":3},"position":[0.3,0.67,-0.1],"rotation":[-0.08,0,0]},{"type":"Mesh","material":"$hardware","geometry":{"type":"TorusGeometry","radius":0.045,"tube":0.016,"radialSegments":8,"tubularSegments":14,"arc":6.283185307179586},"position":[0.16999999999999998,0.05,0.08],"rotation":[0,1.5707963267948966,0]},{"type":"Mesh","material":"$hardware","geometry":{"type":"TorusGeometry","radius":0.045,"tube":0.016,"radialSegments":8,"tubularSegments":14,"arc":6.283185307179586},"position":[0.43,0.05,0.08],"rotation":[0,1.5707963267948966,0]},{"type":"Group","children":[{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.76,"depth":0.06,"radius":0.016,"segments":3},"position":[-0.31,0.38,0]},{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.76,"depth":0.06,"radius":0.016,"segments":3},"position":[0.31,0.38,0]},{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.66,"height":0.06,"depth":0.06,"radius":0.016,"segments":3},"position":[0,0.73,0]},{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.66,"height":0.06,"depth":0.06,"radius":0.016,"segments":3},"position":[0,0.03,0]},{"type":"bimtex:Run","count":9,"from":[-0.25,0.38,0],"to":[0.25,0.38,0],"children":[{"type":"Mesh","material":"$surface:slat","geometry":{"type":"CylinderGeometry","radiusTop":0.025,"radiusBottom":0.025,"height":0.58,"radialSegments":4},"position":[0,0,0]}]}],"position":[-0.34,0.04,0.55],"rotation":[0,-1.3,0]},{"type":"Group","children":[{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.76,"depth":0.06,"radius":0.016,"segments":3},"position":[-0.31,0.38,0]},{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.76,"depth":0.06,"radius":0.016,"segments":3},"position":[0.31,0.38,0]},{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.66,"height":0.06,"depth":0.06,"radius":0.016,"segments":3},"position":[0,0.73,0]},{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":0.66,"height":0.06,"depth":0.06,"radius":0.016,"segments":3},"position":[0,0.03,0]},{"type":"bimtex:Run","count":9,"from":[-0.25,0.38,0],"to":[0.25,0.38,0],"children":[{"type":"Mesh","material":"$surface:slat","geometry":{"type":"CylinderGeometry","radiusTop":0.025,"radiusBottom":0.025,"height":0.58,"radialSegments":4},"position":[0,0,0]}]}],"position":[0.34,0.04,0.55],"rotation":[0,1.3,0]}]},"preview":{"projection":"perspective","azimuth":-38,"elevation":24,"fov":34,"margin":1.06}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/parking.ndjson model.ndjson > dressed.ndjson

Download parking pack 53 KB · NDJSON ↓

The 2 finishes this pack ships

Combinations the pack author curated, rendered under one light and one camera because a comparison needs everything but the variable held still. Pick one to load it above — or mix your own with the slot controls.